Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
6 TECHNICAL CHARACTERISTICS
Opening of the clamp
Screen
Continuity test
Diode test
Low battery indicator
Overshoot indicator of the range
Measuring speed
Peak value
Temperature sensor
Input impedance
Operating temperature
Storage temperature
Operating humidity
Storage humidity
Operating altitude
Battery
Range
Auto power off
Dimensions and weight
Security
52 mm approx.
3-3 / 4 digit LCD (4000 counts) with backlight
The buzzer emits an audible signal when it is lower than 60 ± 30
Typical 0.5mA test current;
Open circuit voltage <2 V DC typical
The icon is displayed
"OL" is displayed
2 measurements per second, nominal
Capture peaks> 1 ms
Thermocouple type K
10 MΩ (V DC and V AC)
From 5 ° C to 40 ° C
-20 ° C to 60 ° C
Max. 80% up to 31 ºC decreasing linearly up to 50% at 40 ºC.
<80%
2000 meters maximum
One (1) 9 V battery
Automatic
After approx. 15 minutes
270 x 107 x 50mm / 554g
For indoor use and in accordance with the double insulation require-
ments established in IEC 1010-1 (2001): EN 61010-1 (2001).
Overvoltage category III 1000 V and IV 600 V.
Degree of contamination 2.
KPA-11T
TRMS CLAMP METER
30 / 46
Publicidad
Tabla de contenido
