Wet/Dry Vac Assembly; Insert Hose - RIDGID 1610RVM0 Manual Del Usuario

Wet/Dry Vac Assembly

1. Position the Powerhead Assembly on
the Drum/Caddy Assembly, as shown
(assembled earlier).
2. Rotate both Latches down and press
until you hear them snap over the
Flanges on the Drum.

Insert Hose

Insert the Release Button end of the
Pro-Hose into the Vac Inlet of the Drum.
The Hose should snap into place.
To remove the Pro-Hose from the Vac,
press the Release Button in the Hose
Assembly and pull the Hose out of the
Vac Inlet, as shown.
SP7094 1610RVM S/E_1610RVM-SE.indd 29
Drum
Latch
Latch
Release
Button
Press
and Pull
Vac Inlet
Pro-Hose
29
Drum
Latch
Handles
Drum
2/3/19 7:11 AM