Filters And Maintenance - Thermador 9000411578 Manual Del Usuario

FILTERS AND MAINTENANCE

GREASE FILTERS:
Metal filters are used to trap the greasy
element of the vapors that develop during
cooking.
The filter mats are made from non-
combustible metal.
WARNING
As the filter becomes more and more
saturated with grease, not only does the
risk of it catching fire increase but the
efficiency of the hood can also be adversely
affected.
Important:
By cleaning the metal grease filters at
appropriate intervals, the possibility of them
catching fire as a result of a build-up of heat
such as occurs when deep-fat frying or
roasting is taking place, is reduced.
Saturation indicator:
When the grease filters reach saturation
point, an acoustic signal is sounded for
6 seconds after the fan has switched off,
~
and an appears in the display. The grease
filters should be cleaned right away.
Cleaning the metal grease filters:
K In normal operation (1 to 2 hours daily),
the metal grease filter must be cleaned
1 x a month.
K The filters can be cleaned in a
dishwasher. It is however possible that
they will become slightly discolored.
K The filter must be placed loosely, and
NOT wedged, in the dishwasher.
Important:
Metal filters that are saturated with
grease should not be washed together
with other dishes etc.
K When cleaning the filters by hand, soak
them in hot soapy water first of all.
Do not use aggressive, acidic or caustic
cleaners.
Then brush the filters clean, rinse them
thoroughly and leave the water to drain
off.
~
Removing and inserting the metal
grease filters:
CAUTION: Avoid risk of burns. The
halogen bulbs must be switched off and
cool.
1. Pull the catch on the grease filters and
lower the grease filters.
At the same time take hold of the
underside of the grease filter with your
other hand.
2. Clean the filter.
3. Insert the clean filter back into the hood.
~
4.
Cancel the in the display: Press the
button ON/OFF.
9