TrekStor DataStation maxi z.ul Manual Del Usuario página 13

Windows® ME / 2000 / XP / Vista and Mac® OS X 10.3 and up
Note for users of Windows® ME, 2000, XP, Vista, Mac® OS X 10.3: Drivers are
not necessary for these operating systems. If you use Windows® 2000, make
sure that you have installed at least service pack 4, and Windows® XP requires
service pack 2 or above.
• Plug the provided power supply into an electrical outlet, and connect
the cable to the "Power" connection of the
DataStation
• Connect the
DataStation
• Turn on the
• Your operating system will recognize the
and will add a local disk ("l
2) Network mode: Via the network, connect the TrekStor
DataStation maxi z.ul
Note: A USB connection is recommended when the
only used with one PC.
• First plug the provided power supply into an electrical outlet, and
connect the cable to the "P
DataStation
• Then plug the provided network cable into the "LAN" connection of
DataStation
the
cable into the network connection of your PC.
DataStation
Note: The
router or switch in the network.
DataStation
• Turn on the
maxi z.ul
maxi z.ul
d ") under "m
ocAl rive
" connection of the
ower
maxi z.ul
.
maxi z.ul
, and plug the other end of the
maxi z.ul
maxi z.ul
– 13 –
DataStation
to a USB port of your PC.
.
DataStation
c
y omPuter
to one or more PCs.
DataStation
can also be connected to a
.
maxi z.ul
.
maxi z.ul
".
is
EN