TrekStor DataStation maxi z.ul Manual Del Usuario página 19

Instructions for safety and use:
• Only qualified persons may perform technical work on the product.
• The product may not be opened or changed. The components cannot be serviced by the user.
• Never expose the device to moisture, condensation and liquids. Protect the device from extremely
high and low temperatures and temperature fluctuations.
Use the device within an ambient temperature of 5ºC to 40ºC.
• Never place the device close to a source of heat, and protect it from direct sunlight.
• Make sure that the surroundings are as dust-free as possible when you use and store the device.
• Never clean the surface of the device with solvents, paint thinners, cleansers or other chemical
products. Instead, use a soft, dry cloth or soft brush.
Note:
• Do not use USB cables longer than 3 meters.
• In certain circumstances, exposing the device to an electrostatic discharge may interrupt the
data transfer between the device and the computer and impair the functions of the device. If
this occurs, the device should be unplugged from the USB port and then plugged in again.
The manufacturer retains the right to continually improve the product. These changes may
be made without being directly described in this quick guide. For this reason, the information
provided in this quick guide may not reflect the current state of the art.
The manufacturer only guarantees suitability for the product's intended purpose. In
addition, the manufacturer is not responsible for damages or loss of data and subsequent
consequences.
Copyright © 2008 TrekStor GmbH & Co. KG. All rights retained. Other cited product or company
names may be trademarks or brand names of the respective owner.
– 19 –
EN