Publicidad
OPERATION
OPERATING THE PRESSURE WASHER (See Figure 11)
Use only detergents designed for pressure washers. Many detergents may require mixing prior to
use. Prepare cleaning solution as instructed on the solution bottle.
• Turn the garden hose on then squeeze the high pressure trigger to relieve air pressure. Once a
steady stream of water appears, release the trigger.
• After ensuring the switch is in the OFF position, connect the pressure washer to the power
supply.
• Set the switch to the ON(I) position to start the motor.
• Turn the garden hose on then squeeze the high pressure trigger.
MOVING THE PRESSURE WASHER
To move the pressure washer:
• Turn the pressure washer off. Point the spray wand in a safe direction and pull trigger to release
water pressure.
• Tilt the machine toward you until it balances on the wheels, then roll the machine to the desired
position.
20
Fig. 11
Publicidad
