Installing and connecting the unit
Lead the wiring to the inside of the charging station, as shown in the following figure.
3.
Check that the unit properly secured.
7.3. Connecting the power to the unit
Cabling requirements
The connection must meet certain requirements:
Connection specifications
Connection type
Number of conductors
Nominal current
Conductor maximum diameter
ABA2022IQM01_ - 7.55.4.413.0 - Installation and Operation Manual
Single phase
Three phase
2P + E
3P + N + E
up to 64 A
up to 64 A
16 mm
(2 x 10 mm
)
2
2
Gewiss
EN
ES
FR
IT
17