161101, 161102, 161103, 161104, 161105, 161106, 161107, 161108,
GB
161109, 161110, 161111, 161112
When connected to any appliance, be sure to turn on the inverter first, and then turn on
the power switch of the appliance.
CHASSIS EARTH:
The chassis earth lug should be connected to an earth point, which will vary depending on
where the power inverter is installed. In a vehicle, connect the chassis ground lug to the
chassis of the vehicle. In a boat, connect to the boat's ground system. In a fixed location,
connect to earth.
If the total watts of electrical appliances exceeds the output capacity of the inverter, or after
operating for a period of time. If the temperature of the inverter reaches 65℃ , the inverter
shall be reduced AC output by the protection circuit.
ATTENTION:
Under saving mode, the inverter will detect AC output every 4~6 seconds. It will cause 4~6 seconds
of delay when using some power tool, as drill, electric saw, mower and etc.
We suggest switching to normal when using power tools.
TURN ON
SECONDLY
TURN ON
FIRSTLY
CHASSIS
GROUND
FAN
LUG
6
REMOTE
CONTROL
LOAD
BATTERY
100%
15
30
14
28
13
26
50%
12
24
POWER
OVER LOAD
11
22
0%
10
20
LOW BAT OVER TEMP
W ARNING:
FAN
DO NOT REVERSE INPUT
65 C
Vedpak 211_Version 1_03.2016
0