Craftsman ZTS 7500 Manual Del Dueño página 19

LUBRiCATiON
Service Interval: 25 hours.
Lubricate the unit at the locations shown in Figures 15
through 17 as well as the following lubrication points.
Grease:
f ,, front wheel grease fittings
• front wheel bushings
• mower pivots
• mower arbors
Use grease fittings when present.
Not all greases are compatible. Use automotive-type lithi-
um grease.
Oil:
• rear frame assembly pivot
• hydro linkage
• brake linkage
frame pivot points
• mower deck height adjustment linkage
• brake linkage
Generally, all moving metal parts should be oiled where
contact is made with other parts. Keep oil and grease off
belts and pulleys. Remember to wipe fittings and sur-
faces clean both before and after lubrication.
Figure 16. Lubricating Rider
Figure 15a. Mower Lubrication
\
\
Figure 17. Lubricating Rider
Figure 15b. Arbor Lubrication (3-Blade Model Shown)
19