Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2. Disconnect the power supply unit
3. Disconnect the drive unit from the power supply unit by removing the con-
nector cable
4. Let the manicure/pedicure set cool off completely.
5. Before cleaning, remove the respective attachment
11
or
12
from the drive unit.
6. Wipe the drive unit, the power supply unit and the storage bag
a damp cloth.
7. Tap the sapphire discs
holder.
8. Clean the attachments
paintbrush, a suitable soft brush or a dry cloth.
9. Let all parts dry completely before placing them in the storage bag.
Storage
− We recommend you use the storage bag
− Store the manicure/pedicure set in a dry and well-tempered location with
an ambient temperature between 0 °C and a maximum of 40 °C.
Troubleshooting
Fault
Possible cause
The drive
The plug of the power supply
unit doesn't
unit is not correctly connect-
work.
ed with the socket.
The power supply unit's con-
nector cable is not connected
with the drive unit.
AFTER SALES SUPPORT
1-866-558-8096
USA
15
from the connector jack
6
and
6
,
7
14
from the power supply.
13
.
7
to remove the abrasive dust from the
,
8
,
9
,
10
,
16
for storage.
Solution
Connect the plug of the pow-
er supply unit to a socket as
prescribed.
Connect the power supply
unit's connector cable with the
designated plug to the con-
nector jack of the drive unit.
6
,
7
,
8
16
11
and
12
with a suitable
service@801service.net
USA
Storage
,
9
,
10
,
off with
21
Publicidad
Capítulos
Tabla de contenido
