Diamond AL4S/F Manual De Instalación, Uso Y Mantenimiento página 43

ENGLISH
Settings/Service 02 : Defrosting data
By pressing the confirmation key
the display mode of the data of the last 32
defrosting cycles.
D09 22Min
S 11:44 10/12/03
The stored defrosting can be selce by using the
keys and
defrostings,
No Data
GB
Press to retur to the Service Menu.
Settings/Service 03 : Door opening/closing
By pressing the confirmation key
shows the registered opening and closing of the
door during the current day.
d=05/11
ALL:03
d=05/11 : Day and month of the registration
ALL:03 : Number of door opening and closing
which duration is longer than parameter C03.
0h14m : Total duration of door opening/closing
time
tot:15 : Total number of door opening/closing
To move to the next day registration press
and .
Press to retur to the Service Menu.
Settings/Service 04 : Parameters
By pressing the confirmation key
the parameter set up mode. On the first line of th
display, it is showed the first parameter with its
, you enter
T=03
. In case there are no stored
the display shows
, the display
0h14m
tot:15
current value and the measurement unit. On the
second line the display shows a short description
of the parameter
By pressing the keys
all available parameters of the PLC. Pressing
you enter the setup mode of the displayd
parameter: press
:
value of the parameter; press
A01 = - 5°C
Press
Settings/Service 05 : Reset Memory
By pressing the confirmation key
the reset memory mode.
Reset Memory?
No
exit the menu without cancelling any data; to reset
the memory press the key
completely reset.
Settings/Service 06 : Restore original settings
By pressing the confirmation key
the restore original settings mode.
Restore?
No
exit the menu and no setting is restored; press
to restore the original parameters.
you enter
14
A01 = - 5°C
Low Alarm
and
and . To change the
- 4°C
to retur to the Service Menu.
Ok
By pressing
Ok
By pressing
. You can scroll
to confirm.
you enter
you
.the memory is
you enter
you