Standards; Transport; Characteristics Of The Place Of Installation; Handling - ADC EcoWash EWH-25 Manual De Instalación

All models comply to standard EN ISO 10472 concerning the safety requirements for industrial laundry machinery.
2006/42/EC Machinery Safety Directive
2006/95/EC Low Voltage
2004/108/EC Electromagnetic Compatibility Directive
UL Standard for Electric Clothes Washing Machines and Extractors; UL 2157 and CSA C22.2 No. 169
For models with a drum capacity of less than 120 dm
Standards EN 60335-1 and EN 60335-2-7 concerning Electrical appliances.
Standards EN 55014, EN 61000-3-2 and EN 61000-3-3 on Electromagnetic compatibility.
For models with a larger capacity:
Standard EN 60204-1 concerning Electrical appliances.
Standards EN 61000-6-1, EN 61000-6-3 y EN 61000-3-1 on Electromagnetic compatibility.
When transporting the appliance, the following should be observed:
o
Current regulations and laws
o
Regulations concerning occupational risk prevention
o
Regulations concerning safety during transport
Check the delivery is in good condition prior to receipt.

6. CHARACTERISTICS OF THE PLACE OF INSTALLATION

As established in current legislation, an omnipolar switch must be installed between the appliance and the mains
electricity supply with a minimum distance of 3 mm for each pole between contacts.
The washing machine must be firmly secured on the floor, which will support its weight and the residual force
generated while spinning.
The washing machine must be correctly levelled leaving spaces to make maintenance easier, 0.5 m on the side and 1
m at the rear.
WARNING! The stopcocks should be close to the appliance in an easily accessible location.
When handling the appliance, the following should be observed:
o
Current regulations and laws
o
Regulations concerning occupational risk prevention
- Safety clothing and gloves must be worn for protection against cuts and knocks and safety shoes should be
used to prevent against injury as a result of falling components.
- When handling and moving the appliance, appropriate tools and resources must be used.
- Any work to the interior of the appliance must be carried out by qualified and skilled personnel.
CAUTION! Inappropriate handling of the appliance may result in damage or injury.

4. STANDARDS

3
(4.24 cu.ft):

5. TRANSPORT

7. HANDLING

5
ENGLISH