Maintenance Schedule - MoJack EZ MAX Instrucciones Para El Montaje Y La Operación

• Before each use, always check for any worn, loose or
damaged parts on the lift. If any damaged parts are
present, do not use the lift and contact MoJack at
1-877-575-3173.
• Clean and oil the entire screw thread after every fifty
(50) uses or at least once a year using light machine
oil.
• Place lithium grease between the Crank Handle Base
and the brass bearing after every fifty (50) uses or once
a year. Without weight on carrier, lift the Crank Handle
to create a small gap between the brass bearing and
the Crank Handle Base. Use a small brush to apply the
lithium grease between the two surfaces.
• Spray grease or lube in Carrier Locking Handle pivot
after every fifty (50) uses or at least once a year.
• Wipe clean and lightly apply grease to front and back
of Tower Assembly after every fifty (50) uses or at least
once a year.
MoJack EZ Max Lift

Maintenance Schedule

21
Carrier
Locking
Handle
pivot
Tower
Assembly
Crank Handle
Base
Brass Bearing
Screw Thread