EDM 08759 Manual De Instrucciones página 25

Lawn mower
Features
Sound and vibration
Measured sound values determined according to EN
60745-2-13:2009+A1:2010.
Vibration total values (triax vector sum) determined
according to EN 60745-2-13:2009+A1:2010. The vibration
emission level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745-2-13:2009+A1:2010 and may be used to compare
one tool with another.
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main
applications of the tool. However if the tool is used for
different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should
also take into account the times when
the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work
patterns.
Keep the noise emissions and vibrations to a minimum
• Only use appliances which are in perfect working order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
Have the appliance serviced whenever necessary.
•
• Switch off the tools when it is not in use.
• Wear protective gloves.
Assembly
Unpacking
Remove the mover from the box by pulling the machine
out.
WARNING! Ensure that the cable is not pinched
Handle Bar
1. Attach the lower handle bar on the lawn mower and fix it
with the quick fix knobs in both sides.
WARNING! Do not over tighten the knobs!
2. Attach the upper handle bar on the lower handle bar.
Fasten with the quick fix knobs in both sides.
EN INSTRUCTION MANUAL
3. Customize the cable and secure with cable clamp.
Assembly the grass collector
Click the frame to the grass collector.
Mounting the grass collector
Attach the grass collector behind the lawn mower under
the rear deflector guard.
REF. 08759