Korona 10665 Manual De Instrucciones página 17

8. A fter the brewing cycle is completed (no more water is dripping through the filter), the carafe (6) can be
removed. When serving coffee do not remove the lid in order to preserve the proper serving temperature
9. A s long as the appliance is switched on, you can keep the coffee hot, by returning the carafe (6) to the
hotplate (7) after serving. The hotplate (7) will automatically cycle on and off to maintain the ideal serving
temperature as long as the coffee maker is switched on.
Attention: The appliance will automatically shut-off within 40 minutes and the indicator light will go
OFF as well. Once the appliance has automatically shut-off, the keeping warm function is also deactivated.
10. To switch off the appliance before the automatic shut-off, press the ON/OFF button on the control panel
If you wish to prepare more than one pot of coffee, the appliance has to be switched off for approx.
5 minutes, in order to cool down.
Using the permanent filter
When using the permanent filter, do not insert a paper filter!
Instead of inserting a paper filter into the filter holder (3) you can insert the permanent filter (3) into the filter
holder. Add your grounded coffee and follow above mentioned steps.
Only use medium to fine grounded coffee, as otherwise the pores of the Permanent Filter
could get blocked .
After use, remove the grounded coffee and clean the permanent filter (3) as described under Cleaning and
care.
Always disconnect the appliance from the mains if you are not using it!
Setting the clock
- connect the power cord to the mains.
- 12:00 appears on the LED display.
- To set the current time, repeatedly press the MINUTE button on the control panel to set the minutes
and the HOUR button on the control panel to set the hour.
Attention: If you want to use the DELAY BREW (timer) function you need to set the clock to the current
time beforehand.
Delay Brewing (Timer)
Allows you to pre-set the time when you would like the coffee maker to automatically brew your
coffee, up to 24 hours in advance.
- Make sure that the clock is set to the current time.
- Prepare the coffee machine as described under Brewing Coffee but, don't start the brewing process,
yet.
- Press the PROGRAM button on the control panel , the ON/OFF indicator light lights up in green and
flashes.
- Press the HOUR and MINUTE button on the control panel repeatedly to set the brewing time of the
coffee.
- Press the PROGRAM button on the control panel to confirm the pre-set time.
- Press the DELAY BREW button on the control panel to confirm. The ON/OFF indicator light lights up in
solid green, and after a few seconds, the current time appears in the display.
- Once the brewing cycle starts at the pre-set time, the ON/OFF indicator light lights up in red.
Press the DELAY BREW button on the control panel to cancel the function.
Instruction Manual
ENGLISH
17