PLASTERBOARD LIFT
To get the most out of your new
plasterboard lift, please read through
these instructions and the attached safety
instructions before use.
Please also save the instructions in case you
need to refer to them at a later date.
Using the plasterboard lift, one person
can lift a covering board with a size of up
to 122×488 cm without any additional
help. The covering board can be lifted a
maximum of 335 cm from the � oor to � at
ceilings, sloping walls or other walls when
the tilt function is used.
The cradle of the plasterboard lift can
be lowered to 120 cm from the � oor so
that it is easy to load a board onto it. The
plasterboard lift can tolerate loads up to 68
kg.
These instructions describe how the
plasterboard lift is assembled, used and
dismantled for transport and storage. Please
read these user and safety instructions
carefully before using the plasterboard lift
for the � rst time.
Technical data
Plasterboard size:
Max. load:
Max. lifting height:
Loading height:
Weight:
46
Max. 122×488 cm
68 kg
335 cm
120 cm
34 kg
Special safety instructions
•
ALWAYS read the instructions before
use, and observe all warnings.
•
ALWAYS inspect the plasterboard lift
each day before use and pay particular
attention to the condition of the wire.
•
ALWAYS allow the plasterboard lift to
reach room temperature before use. If
you move the plasterboard lift from a
cold room to a warm one, condensation
may form, which may aff ect the function
of the brake!
•
Check before use that the brake drum is
clean and dry.
•
NEVER use the plasterboard lift unless
both arms are secured with the lock tab.
•
ALWAYS keep the work area free of
obstructions.
•
ALWAYS wear a helmet when using the
plasterboard lift.
•
ALWAYS be aware of obstructions above
the plasterboard lift when lifting boards.
•
NEVER use the plasterboard lift for
lifting objects other than plasterboards
and similar.
•
NEVER lift more than one board at a
time. Never lift more than 68 kg.