Mounting Instructions; Guarantee - PlasmaMade GUC 1214 Manual De Instalación Y Usuario

7. Mounting instructions

Mounting on extractor hood
The extractor hood must be installed according to the guidelines for recirculation.
For this, see the manual for your extractor hood.
Mounting on the motor
Mount the PlasmaMade Airfilter carefully and level on the motor housing using
the eccentric mounting adapter. Use the ø 2.9 x 19 mm screws to mount the
eccentric mounting adaptor on the motor housing and to clamp the PlasmaMade
Airfilter. Put the mains adapter into the PlasmaMade Airfilter (on the top) and
plug into the socket. After activating the extractor hood motor the filter starts to
operate automatically. See attachment 3.
Mounting on the wall
Use a plumb rule to draw a vertical line above the motor housing. Above the motor
housing, drill the lower hole (in this take account of the maximum dimension
indicated in the drawing) and 90 mm above it, the second hole (you can use the
fixing bracket to position the upper hole). Bend both sides of the fixing bracket
round and fix it to the wall using the plugs and ø 4.2 x 25 mm screws supplied.
Slide the PlasmaMade Airfilter on to the mounting bracket. Fit a flexible duct (not
supplied) between the motor housing and the PlasmaMade Airfilter.
See attachment 4.
Mounting in an existing extractor hood
Remove the duct from the existing extractor hood. Mount the PlasmaMade
Airfilter carefully and level on the motor housing or on the wall according to the
instructions above.

8. Guarantee

The guarantee applies to the electronic part and the operation of the PlasmaMade
Airfilter. A guarantee of 5 (five) years applies to these, assuming the conditions for
installation and fitting and the usage instructions as described are observed. To use
the warranty, you must send an e-mail to PlasmaMade at
service@plasmamade.com. Please state your name, phone number and the problem
in your mail. In a guarantee procedure, after evaluation of your current filter, a new
one will be sent to you. You will need to arrange any removal or refitting yourself;
this also applies to the return of the old filter. Please register your product for
warranty at www.warranty.plasmamade.com.
13