Exit Wireless Setup; Customize Thermostat (Installer Setup) - Honeywell YTH6320 Serie Guía De Instalación Del Sistema

Sistema inalámbrico redlink, con módulo de interfaz del equipo
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

RedLINK™ Installation Guide (EIM)
4

Exit wireless setup

Press
at the EIM to exit wireless setup (light should stop flashing).
CONNECT
Note: The EIM will automatically exit wireless setup after 15 minutes of inactivity.
Note: If installing more than one thermostat and EIM, you must exit wireless setup before
installing an additional thermostat and EIM.
5

Customize thermostat (installer setup)

Follow the steps below to begin installer setup. At each function screen,
press
or
to change the setting as desired, then press
the next function screen.
See tables on pages 9-11 for a description of options for each function.
FAN
To begin, press and hold the
until the display changes (about 3 seconds).
Function
Setting
1
Done
Back
Press DONE to save & exit.
and ▲ buttons
FAN
0
Next
8
NEXT
0
Done
Back
Press ▲ or ▼ to change setting
(see tables on pages 9-11)
Press
to display next
NEXT
function screen
to advance to
0
Next

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido