Schwaiger DSR 1004 CW Manual De Usuario página 31

060615_k7 200 ENG sat_shw
Menu Guide
Channel Search
6/15/06 6:01 AM ˘
6. 22KHz : Depending on the user's antenna switch box or LNB.
7. 0V/12V : Depending on the user's antenna switch box.
8. Tone Burst : Depending on the user's antenna switch box.
9. Press the BLUE button to set Drive(Fine Drive or Normal Drive) to run the motor.
- Fine Drive/Normal Drive : To move the motor, press LEFT/RIGHT( / ) button.
- Go to zero : To move the zero position, press OK(
- Store to location : To store the current position, press OK(
- East Limit : To set the east limit by current position, press OK(
- West Limit : To set the west limit by current position, press OK(
- Clear Limit : To clear the stored limit value, press OK(
G After selecting all that is necessary, press RED button to scan the satellite list.
Pop up widow will be displayed.
G Select ON or OFF according to your Network.
G Select All or FTA Search Type.
G Press OK( ) button and searching will start.
` 24 mac-4 HP LaserJet 5100 Series
You can supply either 22KHz by setting "ON" or not
by setting "OFF".
When selecting the U-LNB 1 and U-LNB 2,
the 22KHz will be dimmed.
You can choose either 0V/12V.
("off", "SAT A" or "SAT B")
T
) button.
) button.
) button.
) button.
) button.
24
DIGITAL SATELLITE RECEIVER