Chicco Cuddle & Bubble comfort Manual De Instrucciones página 12

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 19
let, washbasin, bidet).
WARNING: Drain the tub only after the baby has
been removed.
• When it is not being used, the tube B2 must be
hooked to the relevant fastening point (fig. 29).
• The structure is provided with a towel holder
(fig. 36A-36B).
CLOSING THE PRODUCT
To close the product:
1. Release both buttons from the fixing blocks
A6 (fig. 26 - 27).
2. Collapse the changing table A2 by making it
turn on its back (fig. 28 - 28A).
3. Remove the tub B installed (fig. 30).
4. Remove all objects on the shelf A1.
5. Press both intersections A5 and slightly lift
them upwards (fig. 31).
6. Push outwards on the shelf handle A1 to re-
lease the shelf A1 (fig. 32).
7. At this point, the structure can be folded by
moving the tubular profiles of the frame A to-
gether until the arms of the intersections A5
have fully closed (Fig. 33-34).
ADJUSTING HEIGHT AND LOCKING THE
WHEELS
The product can be adjusted to three different
heights to better suit the height of the user.
• To proceed with the height adjustment refer to
drawing (fig. 35).
• For extra security and stability of the product
during use, it is necessary to lock both wheels
by acting on the brake levers, simply by push-
ing them down (fig. 36).
• In contrast, to move the product with greater
ease, unlock the brakes by lifting the brake le-
vers upward.
WARNING: Never move the product while the
child is on board.
PRODUCT CLEANING AND MAINTENANCE
Periodically clean the product observing the fol-
lowing:
• The product can be cleaned with a moist clean-
ing cloth.
• Do not use solvents or abrasive products on
any of the surfaces.
• Always dry the metal parts to prevent the for-
mation of rust.
• Follow the indications below to wash the re-
ducer:
Wash by hand in cold water
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean
12

Publicidad

Tabla de contenido
loading

Tabla de contenido