Simrad BSM-2 Manual De Instrucciones página 15

x2
MENU WIN
BSM-2_IM_988-0170-09_A.indb 15
Setting up the transducers
The BSM-2 is compatible with Airmar's Transducer ID
protocol. If you have an Airmar transducer that supports
this feature, BSM-2 will read your transducer's
specification at start-up and automatically adjust the
frequency and temperature settings. The transducer's
XID wire (orange) should be connected to the XDCR_ID_
HIGH/LOW terminal in the TEMP HIGH/LOW connector as
shown below.
TEMP HIGH
J5
1
2
1
If your transducer doesn't support Airmar's Transducer
ID protocol, the transducer selection and configuring
needs to be done from the display as shown on the
graphics below.
A detailed description is found in the relevant
documentation for the display.
rEF. CoLor
1 Orange
2 Shield
BSM-2 Installation manual | 15
SIGNAL
XID
XID GND
2/14/2011 2:52:31 PM