Axis Camera Management - Multiple Products/Large Installations - Axis Q7414 Guia De Instalacion

AXIS Q7414 Installation Guide

AXIS Camera Management - multiple products/large installations

AXIS Camera Management can automatically discover multiple Axis devices, show connection
status, manage firmware upgrades and set IP addresses.
Automatic discovery
1. Check that the AXIS Q7414 is connected to the network and that power has been applied.
2. Start AXIS Camera Management.
3. When the AXIS Q7414 appears in the window, right-click the link and select Live View Home
Page. The AXIS Q7414 appears in the window with one entry for each of its four video inputs.
See page 10 for instructions on how to assign the password.
Assign an IP address in a single device
1. Select a channel in AXIS Camera Management and click the
Assign IP button.
2. Select Assign the following IP address and enter the IP
address, the subnet mask and default router the device will
use.
3. Click the OK button.
Assign IP addresses in multiple devices
AXIS Camera Management speeds up the process of assigning IP
addresses to multiple devices, by suggesting IP addresses from a
specified range.
1. Select the devices or video encoder channels you wish to
configure (different models can be selected) and click the Assign
IP button.
2. Select Assign the following IP address range and enter the
range of IP addresses, the subnet mask and default router the
devices will use.
3. Click the OK button.
Page 9