Product Description; Function Description - Pond Boss MVAC Manual De Instrucciones

Information about these operating instructions
Prior to commissioning the unit, please read the instructions of use carefully and fully familiarise yourself with the unit.
Ensure that all work on and with this unit is only carried out in accordance with these instructions.
Adhere to the safety information for the correct and safe use of the unit.
Keep these instructions in a safe place! Please also hand over the instructions when passing the unit on to a new
owner.
Symbols used in these instructions
The symbols used in this operating manual have the following meanings:
Risk of injury to persons due to dangerous electrical voltage
This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate
measures are not taken.
Risk of personal injury caused by a general source of danger
This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate
measures are not taken.
Important information for trouble-free operation.
 A Reference to one or more figures. In this example: Reference to Fig. A.

Reference to another section.

Product Description

Delivery scope and unit configuration
The parts included in the scope of delivery are inside the container and have to be removed first!
How to proceed:
 A
1. Undo the side locking clips and remove the motor housing.
2. Take all loose parts out of the container.
3. Replace the motor housing and close the locking clips.
MVAC
 A
1 Motor housing
2 ON/OFF switch
3 Container
4 Locking clip
5 Inlet, suction hose connection
6 Outlet, drain hose connection
7 Suction hose
8 Drain hose
9 Extension tube
10 Adjustable universal nozzle
– Nozzle fully open (10 mm): Suitable for pond liner, no pebbles at the bottom of the pond, thick layer of sludge
– Nozzle closed (2 mm): Suitable for pond liner, layer of pebbles at the bottom of the pond, thick layer of sludge
11 Algae nozzle
12 Crevice nozzle

Function description

MVAC is a special pond vacuum for removing sludge from ponds and pools.
 High performance vacuum with 1400 watt motor.
 Switches over automatically between suction and emptying mode.
 The delivery scope includes:
– Crevice nozzle, algae nozzle and universal nozzle (adjustable from 0.1 in (2 mm) to 0.4 in (10 mm)).
– 13.3 ft (4 m) suction hose and 6.6 ft (2 m) drain hose
PLEASE CALL 1-888-755-6750 BEFORE RETURNING TO THE STORE.
WWW.THEPONDBOSS.NET
Quantity
1
1
1
2
1
1
1
1
2
1
1
1