Description Of The Appliance; Assembly - Kärcher K 4 Manual De Instrucciones

Description of the Appliance

Illustrations on fold-out page!
1 Water filter
2 Coupling element for water connection
3 Quick coupling for high pressure hose
4 Storage for trigger gun
5 Water connection with integrated sieve
6 Appliance switch "0/OFF"/ „I/ON"
7 Dosage regulator for detergent
8 Storage for trigger gun
9 Transport handle
10 Storage of Plug 'n' Clean detergent bot-
tle with detergent connection
11 Plug 'n' Clean detergent bottle with
locking lid
12 Storage for high pressure hose
13 Storage hook for mains connection cable
14 Storage for spray lance
15 Mains cable with mains plug
16 Bearing wheel
17 Trigger gun
18 Lock trigger gun
19 Key to detach the high pressure hose
from the trigger gun
20 High pressure hose
21 Spray lance with Dirtblaster
For strong contaminations
22 Spray lance with pressure regulation
(Vario Power)
Carrying out the most common cleaning
tasks. The work pressure can be stage-
lessly regulated between "Min" and
"Max". You can add detergent when
"Mix" is selected.
In order to adjust the working pressure,
release the lever of the trigger gun and
turn the spray lance to the desired posi-
tion.
Not included in the delivery
23 Water supply hose
Special accessories
Special accessories expand the possibili-
ties of using your appliance. Please contact
your KÄRCHER dealer for further informa-
tion.

Assembly

Illustrations on fold-out page!
Mount loose parts delivered with
appliance prior to start-up.
Install the storage for trigger gun
Illustration
 Place the bottom holder into the recess-
es and push forward until it audibly
locks in.
 Insert the top holder and push down all
the way.
Install the transport handle
You will need the 2 included screws as well
as a Phillips screwdriver PH 2.
Illustration
 Slide the transport handle into the guide
and secure it with 2 screws.
Install the dosage regulator for
detergent
You will need the 2 included screws as well
as a Phillips screwdriver PH 2.
Illustration
 Insert both detergent hoses onto the
hose fittings.
Illustration
 Install the dosage regulator and con-
nect using 2 screws.
Note: During installation you must
make sure that the tongues of the dos-
age regulator match up with the intend-
ed recesses in the casing.
English 19