Phoenix Gold SX2 400.2 Manual De Instrucciones página 13

Amplifier Owner's Manual
REMOTE
Selecting INPUT MODE 1-4 plus LP for channels 5+6 activates
this port. This port is for connecting the (RBPC) remote bass
level and phase controller with BASS SHIFT
feature of the RBPC with BASS SHIFT® allows for perfect
adjustment of not only the subwoofer level but also 0-180°
of phase adjustment from the listening position. Properly
adjusting phase will allow enhanced bass response,
dynamics and impact at any volume. To adjust, play a test
tone close to the crossover overlap you have the system
adjusted to, typically in the 50-100Hz range. With all system
speakers playing and at a moderate volume, slowly adjust
the phase dial on the RBPC across the entire range. When
the subwoofer is in phase with the other speakers in the
system, you should be able to detect a rise in volume, "the
sweet spot." Now return the control to the sweet spot and
make small adjustments +/- until you maximize the output.
You have now completed adjusting the phase and should
not have to adjust this again. Use the level control to adjust
the subwoofer output to your preference based on music
program material.
RMD
RMD port is for connecting an optional Remote Monitoring
Display (RMD). The RMD allows real-time viewing of system
voltage.
RBPC
The first step if utilizing the RBPC and planning on using
the Phase adjustment feature is to set the Phase on the
connected amplifier to 180° (except SX2 800.4).
FEATURES
The unique feature of the RBPC with BASS SHIFT
perfect adjustment of not only the subwoofer level but
also 0-180° of phase adjustment from the listening position.
Properly adjusting phase will allow enhanced bass response,
dynamics and impact at any volume.
If not utilizing the RBPC at all or not the phase adjustment,
adjust phase directly from amplifier.
Along with the tuning of bass level and phase, the RBPC
also offers amplifier status for power and peak with the
onboard LED. If adjusting level, you can easily detect if you
are driving the amplifier via the peak indication changing
from flashing to solid.
INSTALLATION
Connect the RBPC to the amplifier via the included
connection cable. Find a suitable location that allows easy
access to the controls and mount the RBPC.
GND
This must be connected to the negative terminal of the car's
battery or bolted to a clean, unpainted part of the vehicle's
. The unique chassis.
®
REM
This must be connected to switched +12V, usually a trigger wire
coming from the head unit or ignition. If the system does not have
a standard remote turn-on, use of the AUTO ON feature maybe
useful.
BATT+
This must be connected to the positive terminal (+12V) of the car's
battery via a 70A fuse. The fuse must be located within 18 inches of
the battery. Use of 4GA or larger OFC (oxygen-free) copper wire is
recommended for best performance.
TRI-LIGHT
Tri-light LED amplifier status indicators will change colors according
to an array of system variables.
Blue - Standard Operation
Green - Over Voltage Warning/Thermal Protection
Amber - DC/Short Protection
Red - Internal Fuse Blown
OTM monitors amplifier internal temperatures and if abnormal
temperatures are achieved, OTM will make minor adjustments to
output power to allow the amplifier to return to normal operating
temperatures without interruption.
REMOTE BASS AND PHASE CONTROL WITH BASS SHIFT
TUNING
To adjust, play a test tone close to the crossover overlap you have
the system adjusted to, typically in the 50-100Hz range. With all
system speakers playing and at a moderate volume, slowly adjust
the phase dial on the RBPC across the entire range. When the
subwoofer is in phase with the other speakers in the system, you
allows for should be able to detect a rise in volume, "the sweet spot." Now
®
return the control to the sweet spot and make small adjustments +/-
until you maximize the output. You have now completed adjusting
the phase and should not have to adjust this again. Use the level
control to adjust the subwoofer output to your preference based
on music program material.
PWR
PEAK
LEVEL
6 CHANNEL POWER AMPLIFIER
PHASE
PHASE
CONTROL
CONTROL
RBPC
© 2017 Phoenix Gold • www.phoenixgold.com
SX2 1200.6
RBPC
PWR
PEAK
LEVEL
LEVEL
CONTROL
CONTROL
®