Nova Max Link Guia Del Propietario página 30

NOTE: Your monitor arrives from the factory with "Snd" set to "On."
If the glucose result does not flash and the insulin pump does not
receive the glucose result, then set "Snd" to "On."
10. Press the Left/Right
to move between marked (√) or unmarked
results. Marked results are not included into
the average test results. Hi, Lo, and Control
results are not included into the average.
11. Press the Mode
Marked (√) or Unmarked.
12. If test result is above 600 mg/dL, the screen displays HI; test
result cannot be stored.
If test result is below 20 mg/dL, the screen displays LO; test
result cannot be stored.
NOTE: The monitor will time out after 2 minutes of non-use or if
the strip is removed. The keys are disabled until a strip is inserted.
Results and marking status are saved if the monitor times out, the
strip is removed, or the monitor is turned off.
NOTE: Lancets are for one-time use only. Use a new, sterile lancet
each time you test. Test different areas on your fingertips to avoid
developing calluses. Remove the used lancet from the lancing de-
vice. Follow your local disposal regulations where applicable.
Testing a Blood Sample
button to save the Marking Status:
buttons
21