General Safety Rules - Skil 8101-SL Manual Del Propietário

GENERAL SAFETY RULES

WARNING
or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE
REFERENCE
The following label is on your laser tool for your convenience and safety. They indicate
where the laser light is emitted by the tool. ALWAYS BE AWARE of their location when
using the tool.
Do not direct the laser beam at persons or animals and do not stare into the
laser beam yourself. This tool produces laser class 2 laser radiation and
complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to
Laser Notice No. 50, dated June 24, 2007.
Use of controls or adjustments or performance of procedures other than those
DO NOT remove or deface any warning or caution labels.
ALWAYS make sure that any bystanders in the vicinity of use are made aware of the
dangers of looking directly into the laser tool.
DO NOT place the laser tool in a position that may cause anyone to stare into the laser
beam intentionally or unintentionally.
ALWAYS position the laser tool securely.
ALWAYS use only the accessories that are recommended by the manufacturer of your
laser tool.
DO NOT use this laser tool for any purpose other than those outlined in this manual.
DO NOT leave the laser tool "ON" unattended in any operating mode.
DO NOT disassemble the laser tool.
DO NOT modify the product in any way.
DO NOT use laser enhancing glasses as safety goggles.
6
Read all instructions. Failure to follow all instructions listed below