Maintenance; Cartridge Replacement; Care And Cleaning; Utility Sink - Conglom QL100 Manual Del Usuario

Fregadero de servicio, gabinet de almacenamiento y grifo
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Maintenance

CARTRIDGE REPLACEMENT

To replace the cartridge, please follow these steps:
-
Turn off the water supply to the faucet .
-
Remove water indicator (7) and set screw (8) with a hex key .
-
Remove the handle (9) .
-
Unscrew the cartridge retainer nut (6) .
-
Remove the washer (5) .
-
Remove the old cartridge (4) making sure gasket (3) and spring (2)
remain in their intended place inside the faucet .
-
Insert the new cartridge (4) .
-
Reinstall the washer (5) back in its original position .
-
Reinstall and tighten the cartridge retainer nut (6) . Do not over
tighten .
-
Reinstall the handle (9) and secure it with the set screw (8) using a
hex key . Reinstall the water indicator plug (7) .
-
Turn on the water supply to the faucet . Inspect the faucet for
leaks and test it to make sure it works as intended .

Care and Cleaning

This utility sink is manufactured with premium acrylic . With the proper care and maintenance it will provide you with many years of enjoyment .
SINK
Do
- Use common household cleaners (non-abrasive) or a
mild liquid dish washing detergent . Rinse well and dry
with a clean cloth .
- Remove dust and dry dirt with a soft, damp cloth .
- Clean grease, oil, paint and ink stains with isopropyl
(rubbing alcohol) . Immediately rinse with water after
removal of stain .
Do not
- Do not allow your sink surface to come into contact with
products such as acetone (nail polish remover), nail
polish, dry cleaning solution, lacquer thinners, gasoline,
pine oil, etc .
- Use caution when using sharp instruments that may fall
and scratch the surface .
QL100

CABINET

Do
- Remove dust and dry dirt with a soft, damp cloth .
- Clean grease, oil, paint and ink stains with isopropyl
(rubbing alcohol) . Immediately rinse with water after
stain removal .
Do not
- Do not allow your cabinet surface to come into contact
with products such as acetone (nail polish remover), nail
polish, dry cleaning solution, lacquer thinners, gasoline,
pine oil, etc .
- Use caution when using sharp instruments that may fall
and scratch the surface .
10
9
8
7
6
5
4
3
2
1

Publicidad

Tabla de contenido
loading

Tabla de contenido