Installation (Steel Guide) - Aprimatic GA-MATIC PRO CF800 Instrucciones De Instalación Mecánica, Uso Y Mantenimiento

4.1

INSTALLATION (STEEL GUIDE)

1. Fixing the track bracket to the wall 2cm-15cm over the shaft or intermediate bracket (depending on the actual
installation space).
2. Fixing the steel track to the wall bracket with axis pin. (Fig. 4)
3. Fixing garage door opener to the track by U bracket. It's enough for 2 Nm fastening force.
4. Fixing the opener on ceiling by hanging bracket.
Notice: Make sure the guide is horizontal and vertical to the shaft. Make sure the connection of hanging bracket
and ceiling is firm enough.
5. Fix the clutch cord.
6. Release the clutch, try to open and close the door by hand. Make sure there is no resistance between door
panel and track.
7. Connecting the opener with power and adjusting the operation.
Notice: Make sure the opener's voltage is in accordance with the local voltage. Connect the opener to a properly
earthed power supply.
DS41242-001
FIG.4
19