Battery Replacement - GYS GYSPACK PRO Manual De Instrucciones

Translation of the original instructions

BATTERY REPLACEMENT :

1
Product Battery
GYSPACK PRO
To replace the battery :
• The booster must be disconnected form the power supply.
• First the back panel must be unscrewed (14 screws) and removed.
• Once the back panel is removed, the battery front appears (cf illustration). The battery is connected to the GYSPACK
at two points : at the - terminal - 1 and at the + terminal 2 . To remove the battery, remove the 2 screws that
enable the connection between the battery and the GYSPACK at the terminals + and -.
When putting a new battery, make sure to observe the polarities of both the battery
and the GYSPACK PRO. Terminal - on the left, terminal + on the right (cf illustration).
Put the 2 screws and washers back, tighten the nuts (recommended torque wrench 4
N.m).
• Place the booster's backpanel screws back on.
GYSPACK PRO
Type Voltage (V)
Lead- acid battery 12
Dimensions
Capacity (Ah)
(cm)
22 34 x 20 x43
EN
2
Battery ref
53151
13