Blade Maintenance - Panasonic ER1421 Instrucciones De Operación

Blade maintenance
Removing and mounting the blade

Removing the blade
1. Hold the clipper with the switch
facing upward and push the
blade with your thumb while
catching the blade in your other
hand.
• Be sure to turn off the power
before you remove the blade.

Mounting the blade
1. Fit the mounting hook into
the blade mounting on the
clipper and push in until it
clicks.
Cleaning the blade
1. Brush off 2. Remove the
any hairs blade and
from the brush off
clipper and the hairs
from around from the
the blade. blade edge.
Lubrication
1. Apply a few drops of the oil to
the space between the
stationary blade and moving
blade.
• Apply the oil to the clipper before
and after each use.
2. Remount the blade on the
clipper.
3. Brush the hairs out from
between the stationary
blade and the moving
blade while pressing
down on the cleaning
lever to raise the moving
blade.
5