GE IM-5D Manual Del Propietario E Instrucciones De Instalación página 6

Installation Instructions
PREPARE FOR INSTALLATION
1
Pull the freezer door open to full extension.
bottom on each side of the freezer door using
3/8" hex socket driver.
CAUTION
secure the door before lifting.
disengage it from the
slide mechanism
The door can safely rest
on the bottom. Do not
rest the door on any
other surfaces to avoid
scratches.
2 REMOVE FREEZER DRAWER
extending the drawer then lifting up and out.
Push the bottom
basket back
until the slide
mechanism self
retracts.
6
INSTALLING THE ICEMAKER
3 Screws
Lifting Hazard
REMOVE THE OUTLET COVERS
3
remove the 2 outlet
covers from the
side wall.
covers with a
small flat-blade
screwdriver.
For round
screwdriver into
one of the smaller
outermost slots and
push in firmly to
release the round
cover.
For rectangular
cover: insert the screwdriver into the slot at
release the snap and pull the cover out away
from liner. (This part is disposable and may
break when removed.)
ve the icemaker power cord plug from
the pocket in the side wall.
INSTALL THE ICEMAKER FILL
4
CUP
from the kit, install the
icemaker fill cup that
came with your kit into
the icemaker as shown.
For New Install
Choose the
appropriate size
ice bucket from
the kit. Place the
ice bucket in the
left side of the
freezer basket,
upside down, with
taller end toward
the rear of the
basket.
Outlet
covers
49-60740-4