GE IM-5D Manual Del Propietario E Instrucciones De Instalación página 8

Ocultar thumbs Ver también para IM-5D:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

REMOVE FREEZER DRAWER
9
CORNER
out and up on three tabs while pushing down
on the back of the drawer.
side flange while pulling up on the corner
piece to complete the removal.
REPLACE FREEZER DOOR
10
Pull the lower basket and slide mechanism to
full extension using both hands.
basket and set to the rear of the freezer
compartment until after the freezer door is
located on slides.
CAUTION
secure the door before lifting.
slide mechanisms.
the screws to 65 in-lb.
8
Installation Instructions
INSTALLING THE ICEMAKER (Continued)
Then pull out the
Lifting Hazard
REPLACE FREEZER DOOR
10
(Cont.)
For adjusting freezer door gaps, follow the
instructions in the Owner's Manual.
brackets and make sure the freezer door
operates and closes freely.
RE-INSTALL FREEZER DRAWER
11
rear drawer wheels onto the top of the track
mounted to the side of the freezer walls. The
front wheels on the freezer drawer should be
on top of the bottom basket sides. Place the
ice bucket in the drawer and push the drawer
into the freezer with the front of the bucket
(see page 10) to the front of the basket,.
Make sure:
- The ice bucket does not hit the icemaker
arm and the freezer drawer retracts
completely into the freezer compartment.
- The fill tube extends into the fill cup opening
at the back of the icemaker.
Align and insert tab
on Freezer Door
Bracket with slot
on Freezer Slide
Bracket.
NOTE: Place one
side in first and then
align the other side.
49-60740-4

Publicidad

Tabla de contenido
loading

Tabla de contenido