Cleaning The Appliance And The Brush Head; Cleaning The Adapter And The Charging Stand - Philips VisaPure SC53 Serie Manual De Instrucciones

18
English
7 After 20 seconds, the appliance pauses briefly to let you know that
you have to move the appliance to the left cheek (Fig. 15).
8 Gently move the brush head across your skin from the nose to the
ear.
9 After 20 seconds, the appliance pauses briefly to let you know that
you have to move the appliance to the forehead. Gently move the
brush head from left to right (Fig. 16).
Note: We advise you to not overdo the cleansing and to not
cleanse any zone longer than 20 seconds.
10 After the treatment, rinse and dry your face.Your face is now ready
for the next step of your daily skincare routine.
11 Clean the brush head with water and mild soap.
Cleaning
Never use scouring pads, abrasive cleaning agents or aggressive
liquids such as petrol or acetone to clean the appliance.

Cleaning the appliance and the brush head

Make sure the appliance is switched off before you start cleaning it.
Rinse the appliance and the brush head thoroughly with water and
mild soap after each use, to ensure optimum performance.
1 Rinse the appliance and the brush head under the tap with warm
water and mild soap (Fig. 17) (max. 40°C / 104°F).
2 Remove the brush head from the appliance (Fig. 18).
3 Clean the back of the brush head and the connection pin of the
appliance under the tap at least once a week (Fig. 19).
4 Dry the brush head and the appliance with a towel.

Cleaning the adapter and the charging stand

Danger: Always keep the adapter dry. Never rinse it
under the tap or immerse it in water.
1 Make sure the adapter is unplugged when you clean it. Only wipe
it with a dry cloth.
2 Always detach the charging stand from the adapter before you
clean it (Fig. 20).