Descargar Imprimir esta página

Fein FMM250Q Manual De Instrucciones página 12

Ocultar thumbs Ver también para FMM250Q:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 32
3 41 01 078 06 0.book Seite 11 Dienstag, 16. März 2010 7:39 07
Original Instructions for M
M
ULTI
Symbols, abbreviations and terms used.
The symbols in the Instruction Manual and on the power
tool shall aide in directing your attention to possible haz-
ardous situations when working with this power tool.
Symbol, character
Explanation
Action to be taken by the user
General prohibition sign. This action is forbidden!
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Do not touch the saw blade. Danger of sharp application tools moving back and forth.
Warning against sharp edges of application tools, such as the cutting edges of the cutter
blades.
For a better understanding, unfold the fold-out page at the beginning of this Instruction
Manual.
Observe the instructions in the text or graphic opposite!
Before commencing this working step, pull the mains plug out of the socket. Otherwise
there will be danger of injury if the power tool should start unintentionally.
Use eye-protection during operation.
Use a dust mask during operation.
Use ear protection during operation.
Use protective gloves during operation.
Observe the information in the adjacent text!
An exposed surface is very hot if touched and therefore dangerous.
Confirms the conformity of the power tool with the directives of the European Commu-
nity.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
WARNING
Worn out power tools and other electrotechnical and electrical products should be
sorted separately for environment-friendly recycling.
Product with double or reinforced insulation
.
It is mandatory for you to understand the symbols/infor-
ASTER
mation and to act accordingly, in order for the power
tool to be implemented more efficiently and more safely.
The safety warnings, information and symbols do not
serve as a substitute for the measures to be taken accord-
ing to the regulations for the prevention of accidents.
en
11

Publicidad

loading

Este manual también es adecuado para:

Fmm250