Fein FSC1.6X Manual De Instrucciones página 21

3 41 01 120 21 0.book Seite 21 Dienstag, 10. März 2009 10:19 10
FSC1.6X/FSC1.6Q/FSC2.0Q
Scraping
Typical application: Scraping off old coats of
varnish or adhesives, removing bonded car-
peting, e. g., on stairs/steps or other small/
medium-sized surfaces.
Select a medium to high oscillating frequency.
Maintenance.
Before mounting or replacing application tools or accessories, pull the power
WARNING
plug. This preventive safety measure rules out the danger of injuries
through accidental starting of the power tool.
Service
Have maintenance carried
WARNING
out only through qualified
personnel. Incorrectly mounted leads and
components can cause serious injuries. Have
the required service carried out only
through a FEIN customer service agent.
Cleaning
Prior to any cleaning or main-
WARNING
tenance, disconnect the
power tool from the power supply in order to
avoid accidents.
When using in environments
WARNING
with conductive dust in the
air, such as when working metals, this dust
can settle in the interior of the power tool.
This can impair the total insulation of the
power tool. Therefore, regularly blow out the
interior of the power tool from outside via the
ventilation openings with dry, oil-free com-
pressed air; always wear eye protection
when doing this. For additional protection,
connect a residual current device (RCD) on
the line side.
Do not attempt to clean clogged or
dirty ventilation openings of the power
tool with pointed metal objects; use
non-metal tools or objects for this.
Do not use cleaning agents and solvents
that can cause damage to plastic parts.
These include: Gasoline, carbon-tetrachlo-
ride, chloric solvents, ammonia and domes-
tic cleaning agents that contain ammonia.
When the power tool's power cable is
damaged, it must be replaced by a
qualified person using a specially prepared
power cable, available from your FEIN cus-
tomer service agent.
Accessories.
Only use accessories recommended by FEIN.
Warranty and liability.
The warranty for the product is valid in
accordance with the legal regulations in the
country where it is marketed.
In addition, FEIN also provides a guarantee
in accordance with the FEIN manufacturer's
guarantee. For further details on this, please
contact your specialist dealer, your national
FEIN representative, or the FEIN customer
service centre.
Environmental protection,
disposal.
Packaging, worn out power tools and acces-
sories should be sorted for environment-
friendly recycling. Further information can
be obtained from your specialist dealer.
en
21