Installing The Latch Hanger; Installing Mounting Bracket To The Kayak; Items Supplied; Tools Required - Wilderness Systems Helix PD El Manual Del Propietario

Repeat process with the left pedal (H). Note: The left pedal uses reverse threading so it requires a counter-clockwise tightening.
4.5 Installing the Latch Hanger (from Kit A)
Remove the two 4-40 x 5/16" screw from the inserts on the upper housing blocks of the Helix PD
(A1) with the two 4-40 x 5/16" screws that you removed.
Repeat the process on the opposite side of the upper housing blocks of the Helix PD (E).
The Helix PD (E) is now assembled.

5. INSTALLING MOUNTING BRACKET TO THE KAYAK

5.1 Items Supplied

• Mounting Bracket (A)
Kit A
• (2) Latch Base (A2)
• (6) ¼-20 X 1" Screw (A3)
• (6) ¼ x 1 x 1/16" Washers (A4)
• Cotter Pin with Tether (A5)
• Quick Release Pin (A6)
5.2 Tools Required (not supplied)
• #1 Phillips Head Screw Driver
6 Wilderness Systems, 575 Mauldin Road, Suite 200, Greenville, SC 29607 Wilderness Systems, 575 Mauldin Road, Suite 200, Greenville, SC 29607
TM (E). Install the latch hanger