Charging The Headset; Led Status - NGS vintage artica Manual De Usuario

USER'S MANUAL
VOLUME BUTTONS
Volume up/down (tap + or – buttons
per level change)
Next Press for 2 seconds to go to the
next track
Back Press for 2 seconds to go to the
previous track

LED STATUS

Power ON Blue
Power off Blue
Pairing Blue
Pairing OK Blue
Pairing fail Blue
Back to link Blue
Low battery Red
Calls mode Blue
Call in the mode Blue/Red
Music mode Blue/Red
3
3 flashes
3 flashes
flash150ms by 1 times
flash 10sec by 1 times
flash 5 sec per 1 flashes after 1min power off
500ms per 1 flashes
link after 10sec per flashes
>3.6V 4sec per 1 flashes
3.4V power off
5sec by 3 flashes
Blue & Red Flashes 4sec per cycle
Blue & Red Flashes 4sec per cycle

CHARGING THE HEADSET

First time charging
Before you use this Bluetooth headset, please charge the battery of
VINTAGE ARTICA NGS fully.
CHARGING THE BATTERY WITH USB CABLE
Step1: Insert USB charging cable into USB port of PC or into wall charger with
USB port.
Step2: Connect charging cable with the charging port of headset.
When the red light is on, the headset is charging.
When the red light is off, the headset is charged fully.
It takes about 3 hours to charge the headset fully.
Function LED
Charge Red always ON
Power Full N/A