Bosch 5312 Instrucciones De Funcionamiento Y Seguridad página 8

4 20 41
1
1 3
28
17
18 16
I
15 14 11
10 11 11 12
16. Tool Mounting Pads - The four corners of the
saw provide areas to clamp, bolt or nail the saw
to a fiat work surface.
17. Sliding Base Extensions - These extensions
provide extra workpiece support and are espe-
cially useful when cutting long workpieces.
18. Base Extension Clamping Levers - These
levers lock the base extensions at the desired
positions.
19. Length Stop (Model 5412 only) - For repetitive
cuts of the same length. Can be moved to left
side, if desired.
20. Dust Port - The dust port can accommodate
the dust chute and dust bag or a 1-1/4" vacuum
hose hookup.
21. Bevel Lock Lever - The front-positioned bevel
lock lever locks the head assembly at the de-
sired bevel angle.
-8-
22. Bevel Range Selector Knob- Allows selection
of the bevel range, 0° to 45° left, 0° to 45 ° right,
and complete range of 47 ° left to 47 ° right.
23. Slide Rail Lock Knob -The slide rail lock knob
locks the slide rails when you are not making
slide cuts and when you are transporting the saw.
24. Slide Rails - Guide the head assembly when
making slide cuts.
25. Clamp Position Holes - There are two (2)
holes (not shown) behind the fence for placing
the clamp.
26. Quick Action Clamp (Model 5412 only) - Pro-
vides fast clamping of workpiece.
27. Workpiece Clamp (Model 5312 only) - Pro-
vides fast clamping of workpiece.
28. Cord Wrap - Allows you to easily wrap up the
cord so it's out of the way when transporting or
storing.