Connect To Canvio Aeromobile Wireless Solid State Drive; Connect With Usb - Toshiba Canvio AeroMobile Manual De Instrucciones

Connect to Canvio AeroMobile Wireless Solid State Drive

Connect to Canvio AeroMobile Wireless
Solid State Drive
You can connect to the Canvio AeroMobile Wireless Solid State
Drive directly with the included USB cable (Direct-Attached Storage
mode) or connect wirelessly (Wireless LAN mode).

Connect with USB

To operate via USB, connect the Canvio AeroMobile Wireless Solid
State Drive to the computer's USB port using the included USB
cable.
For Mac users:
To write files using the USB, you will need to install the "NTFS driver
for Mac" to your Mac. Refer to the pre-loaded manual stored on the
Canvio AeroMobile Wireless Solid State Drive for more information.
USB 3.0 port
(Sample Illustration) Canvio AeroMobile Wireless Solid State
Drive USB connection
To connect the Canvio AeroMobile Wireless Solid State Drive to your
computer:
1 Make sure the Canvio AeroMobile Wireless Solid State Drive
is powered OFF.
2 Connect the included USB 3.0 cable to the Canvio
AeroMobile Wireless Solid State Drive.
3 Connect the other end of the USB 3.0 cable to your
computer's USB port.
You can now begin transferring data to and from the product.
USB cable
Getting Started
USB port
21