Electronic Control - Indel B TB 28 BT DT Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

TB 28 BT DT

ELECTRONIC CONTROL

The device is equipped with a multi-level battery monitor that protects your vehicle battery against excessive
discharging when the device is connected to the on-board DC supply.
If the cooler is operated when the vehicle ignition is switched off, the cooler switches off automatically as
soon as the supply voltage falls below a set level. The compressor will start up again automatically in a few
minute when the voltage goes back to normal values.
Note: these values are measured at control unit input and/or on the DC socket.
BATTERY PROTECTION LEVEL
It is possible to set three different battery protection threshold levels:
VOLTAGE
PROTECTION POSITION
LOW
MIDDLE
HIGH
Read the "CONTROL PANEL USE" section to learn how to modify the battery protection level.
TB28BT DT_(DC)_IM_20190712
DISPLAY
CUT OFF (V)
1 Bar
2 Bars
3 Bars
14
12V
CUT IN (V)
9.4
10.9
10.9
12.4
11.2
12.8
24V
CUT OFF (V)
CUT IN (V)
21.1
22.7
22.2
23.6
24.2
25.7

Publicidad

Tabla de contenido
loading

Tabla de contenido