Heating Element; How To Use - Mediclinics M092A Manual De Instalación Y Utilizacion

ADJUSTMENTS
ADJUST THE SPEED OF THE MOTOR AND THE DETECTION DISTANCE
The hand dryer has means to adjust manually the distance for detecting hands and the
speed of the drying air.
These adjustments of the motor speed and detection distance must be made by
a qualified technician only.
The adjustments can be made by moving the respective cursors of the two linear
potentiometers, as shown in figure.

HEATING ELEMENT

Some models of the hand dryer incorporate an internal heater that may be enabled by
a switch.

HOW TO USE

The hand dryer starts automatically when the hands are placed near the LEDs
detection zone, which is just next to the air outlet. Hand detection and the ensuring
starting of the machine is based on emission-reflection-reception of an IR light beam
coming from the sensors. The detection distance is between 120 and 150 mm
approximately. (4.72 – 5.9").