Restore Factory Settings - Rollei 28031 Manual Del Usuario

Functions
23
Mode options
After the transmitter has started, press the mode button repeatedly to switch
between the mixed mode and the multi mode .
Test
Press the test button to check whether the flash units with the same channel will
flash with the desired mode and parameters .
Note: Please note that the test button will only work if the transmitter is not
attached to the camera .
LCD
Press any button to turn on the LCD backlight . If the trigger is not used for about
10 seconds the LCD light will automatically turn off .

Restore Factory settings

Press the OK button for about 3 seconds and the trigger will restore the factory
settings .