Code Reader Does Not Power Up - Foxwell NT200E Guía Rápida

● Check NT200E's OBDII connector for
bent or broken pins.
● Make sure the vehicle is OBDII/EOBD
compliant.
● Cycle the vehicle key to OFF for 10s and
then back to ON.
● Verify battery voltage is at least 8.0V
with KOEO.
Verify that the control module is not
●
defective.

3.2 Code Reader Does Not Power Up

If the NT200E will not power up,
communicate with vehicle's control module,
or functions incorrectly in any other way, do
the following:
● Check DLC for broken or bent pins and
clean the pins if need be.
Make sure NT200E is correctly
●
connected to the vehicle's DLC.
● Verify battery voltage is at least 8.0V
with KOEO.