Scope; Inteded Use; Contraindications; Installation - HEBU medical HB 8888-01 Instrucciones Para El Uso Y El Servicio

HEBU Dust extractor Set
!
Intended purpose: This device is intended to be used for the
extraction of fine, dry grinding dust.
!
When vacuuming, the filter may never be removed.
Do not rivet or screw any signs or symbols onto the device. This can
!
render the protective insulation ineffective. We recommend using
adhesive signs.
!
Only ever use undamaged plugs and cables. Check the plug and
cable at regular intervals.
!
The mains voltage and voltage specification given on the device
must be in agreement.
!
Only use original HEBU accessories.
!
Wear personal protective gear, goggles, ear protectors and gloves
!
The device may not be operated in potentially explosive
atmospheres

3 Scope

Dust extraction equipment is used in orthopedics to remove gypsum dust.

3.1 Inteded Use

dust extractor; Accessories: An assortment of devices used to extract the dust produced by a
plaster saw during gypsum removal (e.g., pneumatic or electric gypsum saw) from the working
field. It usually consists of a motorized vacuum pump, a filter and a collection container (e.g., bag
or cartridge). It is usually a mobile unit and its motor can run simultaneously with the saw motor.

3.2 Contraindications

There are no known contraindications.

4 Installation

4.1 Installation Dust Removal Unit

➢ Pos.1 to clip on with Pos.3 and to tighten with Pos. 2.
➢ Pos. 5 (o- ring) to put over Pos. 4 and to grease bajonett fitting.
➢ Pos. 1 to connect the bajonett fitting over Pos. 4.
15
EN