Brother TD-4000 Guia Del Usuario página 37

Problem
When printing via the USB
cable, the printer repeatedly
pauses and then continues
printing.
An error occurred when the roll
cannot be fed to the beginning
of the label.
• Is the printer set for sequential printing?
If so, set print mode to buffered printing. (Open printer
properties from [Control Panel] - [Printers (2000) / Printer and
FAX (XP) / Hardware and Sound - Printers (Windows Vista
and click [Printing Preferences...] button in the [General] tab.
Choose the option "After one page of data is received".)
• An alternative solution is to disconnect the LAN cable until USB
printing is completed.
• The procedure for feeding to the beginning of the label is
different for die cut labels and continuous length label. See
"Setting the RD Roll" on page 12.
• When using die cut labels with a length of 6" (152.4mm) inches
or more, an error may occur if the TD-4000/4100N cannot
detect the beginning of the label after the first time that the roll
is fed. To clear the error, press the Feed button again.
Solution
31
®
)]
STEP
1
STEP
2
STEP
3