To Insert And Remove The Battery - SportDOG NoBark 18 Manual De Funcionamiento

To Insert and Remove the Battery

Note: Do not install the battery while the NoBark 18 is on your dog.
This NoBark 18 utilizes a replaceable RFA-67 battery.
This unique battery is designed to make battery
replacement easier and increase water protection.
To Insert the Battery:
Make sure the Mode
Switch is turned to the
OFF position. To insert the
battery, align the symbols
on the battery (arrow) and
NoBark 18 (triangle). Use
the Test Light Tool to turn
the battery clockwise until
the arrow lines up with the
lock symbol on the housing.
To Remove the Battery:
Make sure the Mode Switch
is turned to the OFF position.
To remove the battery, turn the battery counter-clockwise using
the Test Light Tool. DO NOT attempt to cut into or pry open the
battery. Be sure to discard the used battery properly.
A replacement RFA-67 battery can be found at many retailers.
Contact the Customer Care Centre or visit our web site at
www.sportdog.com to locate a retailer near you.
Note: After battery removal, turn the Mode Switch to TEST to ensure the
NoBark 18 is deactivated. This will occur within 5 seconds.
6 www.sportdog.com