Operation; Specifications; General Specifications - Minipa MDR-611 Manual De Instruccion

3) OPERATION

Follow the above steps to operate correctly the resistance box.
• Select the desired resistance in the decade through the
rotary switches, pay attention to the chosen multipliers. For
measurement and use of this resistance use the outputs 0
and 1111110Ω.
• If you need a ground point or reference uses a banana-
banana wire for short-circuit the points 0 and the earth.
• Do not short-circuit the points 0 and 1111110Ω.
• When to use the decades of low ranges remembers of that
the accuracy is guaranteed since that the contact resistance
is compensated.
• For measure the contact resistance, leave all the rotary
switches in zero position and measure the residual value of
resistance (between 0 and 1111110Ω).

4) SPECIFICATIONS

A. General Specifications
• Operation Environment: 5°C ~ 35°C, RH < 75%.
• Storage Environment: 5°C ~ 35°C, RH < 75%.
• Conformity: JB/T8255-1999 equivalent to IEC-477-1974.
• Dimensions: 284(H) x 94(W) x 95(D)mm.
• Weight: 1.25kg.
9