Operating Instructions; Technical Specifications; Supplied Components; Charging The Battery Pack - Flex ALR 511 A Instrucciones De Funcionamiento

Technical specifications

Order number
Precision
Self-levelling range
(horizontal)
Operating modes:
– Rotating laser beam (standard)
– Scan 1: line (~16 cm/m)
– Scan 2: oscillating beam (~24 cm/m)
– Point
Range:
– With receiver
– Rotating
(without receiver)
– Point function
(without receiver)
– Scan function
(without receiver)
– Remote control
Speed of rotation
Operating duration
(battery charge)
Visible laser diode
Laser class
Weight (ALR with
battery pack)
Battery charger
– Input
– Output
* depending on the ambient light
16
311.308
2.0 mm/10 m
±3.5°
ˆ200 m
approx. 20 m*
approx. 50 m*
approx. 30 m*
approx. 50 m*
0–600/min
10 h
635 nm
2
1.95 kg
90–240 V / 50–60 Hz
6 V / 0.8 A

Supplied components

Rotational laser ALR 511 A including battery
pack
Remote control including 9 V unit
Receiver with dual display, magnetic,
including batteries
Retaining clamp for receiver
Wall and floor support for ALR
Adapter for vertical application
Battery charger for battery pack
Battery housing for ALR
Transportation case

Operating instructions

Before switching on the power
tool
Unpack the power tool and check that the
delivery is complete and not damaged.
Before using the power tool for the first time
– Charge the battery pack,
– Insert the battery into the remote control,
– Insert the batteries into the receiver.

Charging the battery pack

Note
If the LED (6) flashes, charge the battery
pack. While the power tool is operating with
the rotating laser beam, only the rotation
switches off, the laser beam remains on.
n Connect the battery charger to the
socket (12).
n Connect the battery charger to the
power supply. The LED (13) is lit red.
The charging time for a fully discharged
battery pack is approx. 10 hours. During the
charging process the power tool should be
switched off.
Rotational laser