Sunbeam 157903 Manual Del Usuario página 14

Q What does "F" ,"FF", "F1" or "F2" mean on my Electronic Digital Control?
A The digital controls are designed to notify you in the event that a problem has been discovered
by flashing "FF", "F1" or "F2" on the display.
Models: ChoicePlus ™
FF
Follow instructions below.
Models: SelectTouch ™ , ComfortSet ™
F1
Follow instructions below.
Models: SelectTouch ™ , ComfortSet ™
F2
Follow instructions below.
Models: StyleSmart ™ II, DesignSmart ™ , ChoiceTouch ™
F
Follow instructions below.
1.) Follow the instructions on the flag tag attached to the control cord to reset control.
2.) Check the blanket/mattress pad for visual damage.
3.) If no visual damage is found, unplug the system from wall outlet.
4.) Check that the control is well-connected to the module.
5.) Plug the power cord into the wall outlet.
6.) Set the control to "On".
7.) If the system does not operate after 2 or 3 times trying to reset, disconnect the power cord
and contact Sunbeam Consumer Care.
Q What does a flashing light mean on my OneSet™, EasySet™, PrimeStyle™ AO
or EliteStyle™ control?
A These controls are designed to notify you in the event that a problem has been discovered
by flashing the light on the control. Follow instructions on the flag tag to reset control. First,
check the heated product for visual damage. If no visual damage is found, unplug the system
from wall outlet. Check that the control is well-connected to the module. Plug the power cord
into the wall outlet and turn the control On. If the product still does not operate after 2 or 3
times trying to reset, disconnect the power cord and contact Sunbeam Consumer Care.
14
For questions or support, please visit www.sunbeambedding.com.